Wireless Battery Pack

wireless battery pack

The Portable Site Survey H/C Power Pack for Access Points and Bridges

Ensign offers a wireless battery pack featuring - sealed lead acid DC power source, designed to power Wireless Access Points and Bridges (tested with Aruba and Cisco devices), to facilitate mobile site surveying without the need for trailing power cables and extension leads.

The pack provides 42 volts DC power via the Ethernet Cat5 LAN connection and comes with a mains powered, two-stage automatic sealed lead acid battery charger, and a pole mounting plate for ease of use.

The pack features a 3-pin power connector which is used to power the associated Access Point / Bridge, and also to charge the battery via the supplied two-stage automatic charger.

Wireless Battery Pack Specification

Dimensions:      200 x 150 x 90mm (excluding pole mounting bracket)
Weight:           3.4 kg
Material:           ABS case rated to IP50
Output:            42 V DC 275mA maximum
Indicator:          Red LED indicates power on
Connector:        Locking DIN connector 42V DC output and charge input
Environmental: Protect from rain and freezing, Temperature range 0-40 °C

Charger Specification

Suitable for UK and European charging

Input:         220/240 V AC 6VA
Output:        14.5 V DC max, 600 mA
Charging:     Current limited, intelligent voltage control
Indicators:     Red LED - Bulk charge - indicates main charge cycle in progress
                    Green LED - Float charge - indicates charge cycle complete

Wireless Battery Pack Usage Guidelines:

The pack should always be stored in a charged condition in a dry location away from heat sources and direct sunlight. During long term storage the pack should be given a top-up charge at least every 3-months. The pack can be damaged by leaving it in a discharged (flat) state. Always switch-off and recharge after use.